TOC Analyzer | Benefits for selecting the PAT700

TOC PAT700

The PAT700 TOC analyzer fully complies with all global pharmacopeias (USP, EP, JP) requirements. Each sample is fully oxidized guaranteeing the most accurate TOC result that follows EP2.2.44 guidelines. Production uptime is assured with the PAT700 main and standby dual UV lamp design, making it the ideal choice for on-line TOC release. Save time and money - the PAT700 can be installed online and run up to 4 grab samples offline.

 

 

 

 

 

 

PAT700 TOC Analyzer Product Specifications

TOCOperating Range0.5 to 2,000 ppb as Carbon
 Display Resolution0.1 ppd
 Accuracy+/-1 ppd or +/-5% whichever is greater
 Repeatability+/-0.3 ppd or +/-1% whichever is greater
 Limit of Detection0.5 ppb
 Maximum Input Conductivity0.2 uS/cm for all waters, 1.0 uS/cm for all neutral waters, 5.0 uS/cm for water with CO2 as the sole conductive species
ConductivityConductivityRange 0.05 to 150 uS/cm (@25* C)
 Display Resolution0.01 uS/cm
 Conductivity Accuracy+/-2% over full range (uncompensated)
 ResistivityResistivity Range 0.2 to 18 MQ-cm (@25*C)
 Display Resolution0.01 over full range
 Available ModesTemperature compensated to 25*C, or uncompensated
TemperatureAmbient Operating Range 10 to 40*C (50 to 104*F)
 Measurement Accuracy+/-0.4*C
 Sample Water Range5 to 95*C (41 to 203*F)
 Display Resolution0.1 over full range
Physical SpecsUV Lamps2, with UV Detect technology
 Interface/DisplayColor with touch screen
 Maximum Altitude4,000 m (13,125)
 User I/O WiringThree, 3/4-inch conduit openings or quick disconnect fittings
 Standards SystemOnboard, Automated Standards Introduction System (OASIS)
 Dimensions59.7 w X 22.9 d X 25.4 h (23.5 X 9 X 10 inches)
 Weight13.6 kg (30 lbs)
 Sample Inlet Flow Rate Range60 mL/min to 300 mL/min
 Sample Inlet Pressure Range10 to 100 psi (69 to 690 kPa)
ComplianceInstallation CategoryII
 Pollution Degree2, IEC 61010-1
 CE ComplianceEN 61010-1 and EN 61326
 Safety RatingETL, conforming to UL 61010-1 and CSA 22.2 No. 61010-1
 Enclosure RatingConduit version: IP56 Quick connect version: IP46
 Release TestsUSP <643>, USP <645>, JP 16, EP 2.2.44
New FeaturesCIPSelectable mode for Clean-In-Place analysis
 Dual Stream optionToggle or programmable stream switching
 Excursion samplingMinimum flow rate to fill excursion bottle = 160 mL/min
 Rouge detectionIdentifies oxidation cell contamination from roughing

ASX 7200 Auto Sampler  Specifications

Physical SpecsVial Capacity36 Grab sample bottles HDPE or Borossilicate USP Type 1 glass
 Dimensions45.7 cm X 36.6 cm X 53.7 cm (HxWxD)
 Weight21 kg (45 lbs)
CommunicationsCommunicationsRS232 interface with PAT700 - No external PC required
EnvironmentAmbient Environment10 - 40*C, 5 - 95% non-condensing RH
PowerPower Requirements100 - 240 VAC +/- 10%, 4.4A
สนใจสินค้าและบริการ ติดต่อคุณ.ปริญญา
โทร.089-8233773 # 083-7790808 # 086-3124690 # 082-4911112
เเฟกซ์. 02-0153961
ID Line : adm22
ID Line : 0863124690
E mail : nui_cal@hotmail.com
0 บาท
จำนวน:
Visitors: 700,729