CEDAR DIS-IP50

Digital Torque Tester

CEDAR Model DIS-IP50

ขอใหม่ 100% ลูกค้าซื้อมาไม่ได้ใช้งาน

ขายถูก

ถ้าต้องการเช่า สอบถามราคาได้ครับ


พร้อมใบรับรองผลสอบเทียบ ISO/IEC17025 


Digital Torque Tester with flanged remote sensor calibrates torque tools up to 362 lbf-ft. It has an accuracy of .5% F.S., 1 LSD. Select Peak, Real Time or Peak Down measurement modes. Programmable high/low setpoints enable GO/NO GO testing; green lights between high and low setpoints, and red for under low and over high setpoint. 

Use the 800 internal memory for peak data recall or USB download for                                                                       analysis by Imada data acquisition software SW-1SV-USB. 

Calibrate your own torque wrenches and electric drivers and and save down time. Do not use with power drivers or impact tools (Ask for DI-1M impact wrench torque tester).




  • Heavy duty metal construction
  • lbf-in, kgf-cm, N-cm, or lbf-ft, kgf-m, N-m (see table below)
  • 800 data memory for recall or for SPC download
  • USB output for SPC capability
  • Peak, Real Time and Peak Down measuring modes (selectable)
  • Accuracy: 0.5% F.S. 1 LSD (32 to 100F)
  • Both clockwise and counterclockwise operation
  • AC adapter/charger included
  • Runs on internal NiCad batteries (8 hour use)
  • Programmable High/Low setpoints with GO/NO GO LED indicators and audible beep

Torque Ranges
ModelCapacityDrive
DIS-IP50.20 - 44.00 lbf-in
0.20 - 50.00 kgf-cm
2.0 - 500.0 N-cm
0.020 - 5 N-m
1/4"
DIS-IP502.0 - 440.0 lbf-in
2.0 - 500.0 kgf-cm
20 - 5000 N-cm
0.20 - 50.00 N-m
3/8"
DIS-IP20020 - 1740 lbf-in
2.0 - 145 lbf-ft
0.20 - 20.00 kgf-cm
2.0 - 200.0 N-m
1/2"
DIS-IP50020 - 4400 lbf-in
2.0 - 362 lbf-ft
0.20 - 50.00 kgf-cm
2.0 - 500.0 N-m
3/4"

สนใจสินค้าและบริการ ติดต่อคุณ.ปริญญา 

โทร.089-8233773 # 083-7790808 # 086-3124690 # 082-4911112

เเฟกซ์. 02-0153961
ID Line : adm22
ID Line : 0863124690
E mail : nui_cal@hotmail.com


17,500 บาท
จำนวน: